Windows 11 Memory Integrity: What It Costs You in Games

You installed the Windows 11 2026 Update, launched your usual game, and the frame counter sits a little lower than you remember. Or a friend told you Memory Integrity is "the virtualisation thing that costs FPS" and you want to know whether to switch it off tonight.
Both reactions are reasonable, and both skip a step. Memory Integrity is a genuine security boundary, and it does add virtualisation overhead. Whether that overhead matters on your machine is measurable in about twenty minutes, without trusting anyone's benchmark — including ours.
This guide covers what the feature does, why 26H2 enabled it on more systems, how to check your own status, and how to run a fair before-and-after test. Nothing here depends on a benchmark you cannot reproduce, and we state plainly what you give up by disabling it.
The test itself takes one reboot per state and tells you more about your machine than any roundup can.
What Memory Integrity Actually Does
Memory Integrity is Microsoft's consumer name for HVCI, Hypervisor-Protected Code Integrity. It runs inside Virtualisation-Based Security and moves kernel driver code-integrity checks into an isolated environment, so malware that has already reached kernel level cannot switch those checks off.
The cost is structural. Code that would run directly now crosses a virtualisation boundary, and the hypervisor enforces second-level address translation. That adds CPU work per privileged operation and memory overhead for the protected region. On the desktop you will not notice. In a game producing hundreds of frames per second, CPU time sets the frame ceiling, which is why the penalty concentrates in CPU-bound scenes rather than GPU-bound ones.
Why 26H2 Turns It On for More People
Windows 11 26H2, the Windows 11 2026 Update, is generally available: announced 2026-09-29 with broader availability from 2026-10-28. It arrives as an enablement package on eligible 24H2 and 25H2 devices and reports build family 26300.
Microsoft documents no gaming FPS improvement for 26H2, and states that 24H2, 25H2 and 26H2 share the same system files. The update does not make games faster on its own. What it can do is change defaults: 26H2 expands virtualisation-based security coverage, so Memory Integrity ends up enabled on more systems, particularly machines upgraded from older builds or clean installs where it was previously declined.
Two caveats: enabling it requires compatible drivers, so an old driver can block it rather than let it switch on quietly, and OEM images or management policy can override the consumer default in either direction. Treat "the update did it" as a hypothesis to verify.
How to Check Whether It Is Running
Open Windows Security > Device security > Core isolation details. The Memory Integrity toggle reads On or Off, and if a driver is incompatible the page names it — useful evidence in itself.
For a scriptable check, run an elevated PowerShell prompt and query Device Guard:
Get-CimInstance -ClassName Win32_DeviceGuard `
-Namespace root\Microsoft\Windows\DeviceGuard |
Select-Object -ExpandProperty SecurityServicesRunning
A value of 2 means HVCI is running. The older msinfo32 route also works: look for Virtualization-based security Services Running and check whether Hypervisor enforced Code Integrity appears. Record the state and date first; updates can restore defaults.
Measure First, Then Decide
The only number that matters comes from your machine. Tom's Hardware and Windows Latest have both reported frame losses with Memory Integrity enabled, from a few percent up to roughly 15% in their worst tested cases. Those are third-party measurements on their hardware: evidence that the effect is real and variable, not a prediction for your PC.
A measurement worth trusting needs four things:
- One variable. Change Memory Integrity, reboot, and leave drivers, game version and graphics settings alone.
- A repeatable scene. Use a built-in benchmark or the same save file, not a random online match.
- Stable conditions. Same power plan, same background apps, same room temperature.
- Frame-time data. Average FPS hides stutter; 1% lows and frame times do not. Our guide to measuring FPS improvements properly covers the method.
Run the test twice with the setting on and twice with it off, then compare medians. If the difference sits inside your run-to-run noise, you have the answer: on your hardware, in your games, it does not matter. Keep the protection.
The Security Trade-Off, Stated Plainly
Disabling Memory Integrity removes a real layer of defence. Windows is not left defenceless — Defender, Secure Boot and the rest still work — but you reopen a class of kernel-level attack that Microsoft has spent years closing. On a PC that also holds your email, browser sessions and work files, that is a poor trade for a few frames.
There is a compatibility angle too. Some anti-cheat systems and driver packages expect HVCI to be present; some legacy hardware and low-level overclocking utilities cannot run while it is enabled. Check current guidance rather than a 2023 forum post.
And the practical one: if you disable it for frames, a later feature update may put it back. Budget time to re-check after each major release.
If You Turn It Off, Do It Properly
Use the Windows Security toggle, not a registry hack or a third-party debloat script. Switch it off, reboot, then confirm the toggle reads Off and that the PowerShell query no longer returns 2. Do not stack this with five other changes in one session, or you will never know which one helped.
If a game or anti-cheat then refuses to launch, turn Memory Integrity back on and reboot before troubleshooting anything else. That rules out the common self-inflicted cause.
A Decision Table by Use Case
| Situation | What we would do | Why | |---|---|---| | CPU-bound shooter, measured loss above noise | Keep it off only if the gain repeats and the PC is games-only | The gain is real, but the machine is now a dedicated gaming box | | Single-player, clearly GPU-bound | Leave it on | The overhead hides behind the GPU | | Streaming, editing or work on the same PC | Leave it on | Credentials and files live on this machine | | Older CPU with a modern GPU | Measure first; expect a larger relative hit | Less CPU headroom absorbs the overhead | | Legacy drivers or strict anti-cheat titles | Check compatibility first | Disabling may fix one app and break another |
Our VBS performance guide covers the parent feature, and the timer resolution explainer covers a different source of CPU overhead often confused with it.
Tune Around It Instead
There is a middle path most "disable everything" guides ignore: keep the security feature and recover CPU time elsewhere. Startup apps, overlays, background recorders, redundant services and a cluttered launch stack consume CPU in exactly the CPU-bound scenes where HVCI overhead becomes visible. Recovering that headroom costs no security.
That is the approach SageTweaks takes: documented, reversible Windows and GPU configuration changes, with security boundaries left alone unless you explicitly choose otherwise. It will not conjure frames a game cannot deliver. What it removes is the self-inflicted overhead that makes a marginal setup feel worse than it should.
Our Recommendation
Measure first and default to keeping it on. On a GPU-bound system it usually costs nothing you can feel, and it is one of the better protections Windows offers. If you are CPU-bound in competitive games and a careful test shows a repeatable loss, disabling it is defensible on a dedicated gaming machine — provided you accept the reduced protection and re-check after every update. What we would not do is disable it because a video said so, on the PC holding your email and tax returns.
Sources reviewed November 2026: Microsoft Learn (Windows 11 26H2 and Device Guard documentation), Tom's Hardware, Windows Latest.

Researched and written by the SageTweaks editorial team from vendor documentation and hands-on Windows testing. Where a claim cannot be measured, we say so instead of inventing a number.
More from SageTweaks →SageTweaks
Ready to review guided PC optimization?
Use SageTweaks to review FPS, input latency, and Windows overhead workflows. Guided optimization for Windows 10 & 11.
- Guided GPU, CPU & power plan workflows
- Dedicated and detected-game FPS profiles
- Registry cleaner & startup manager
- Monthly, Yearly & Lifetime plans
30-day money-back guarantee
Next steps
Free PC optimization checklist
The 47-tweak manual version — yours to keep.
Free per-game FPS cheat sheets
Printable settings for Valorant, CS2, Fortnite, Apex.
See every SageTweaks feature
System tweaks, game profiles, cleaner, registry, power plans.
How we keep your PC safe
VirusTotal report published, rollback support, clear network use.
Read user reviews
Read public feedback and product notes before you buy.
Compare plans
Monthly $5.99 · Yearly $49.99 · Lifetime $79.99.
Related Posts
DLSS 4.5 vs DLSS 5 (2026): Upscaling, Neural Rendering & Frame Gen
Understand the difference between DLSS 4.5 Super Resolution and DLSS 5 neural rendering in 2026: supported GPUs, the October update, image quality, FPS and latency.
RTX 50-Series Best Settings & Optimization Guide (2026)
Get the most from your RTX 5090, 5080, or 5070. NVIDIA App settings, undervolting, DLSS 4 presets, and shader cache tuning that unlock real FPS.
NVIDIA Control Panel Missing? Where Settings Moved
NVIDIA retired the Control Panel in driver 610.47. Here's where every 3D, display, and G-Sync setting moved in the NVIDIA App, plus the settings now gone.
